On the processing of stamping parts of the lathe equipment attention points are mainly as follows:

　　Keep the cuffs closed and wear tight protective clothing. Long hair should wear protective cap, do not wear gloves when operating. Chuck, disc must have a safe bolt, to tighten before use; The tapered shaft chuck shall be fitted with a tie rod. Check the working condition of the lathe before the operation, find out the problem in time, clamping workpiece and tool to tighten. Clamping workpiece chuck, dial plate, the protruding part of the heart clip best use protective cover, avoid wringing clothes and other parts of the body. If do not have protective cover, should notice when operating interval, do not approach. When workpiece transformation, do not wrap sand cloth sanding parts or use cotton sand polishing parts, sanding inner hole and outer circle is necessary to wrap sand cloth with stick. To cut down the strip chip, spiral shape long chip, use hook to eradicate in time, prohibit to pull by hand.

　　In addition to the lathe equipped with active measuring equipment in the work, should park the measuring workpiece, and move the tool to a safe position. When turning long and thin workpiece, the intermediate frame or tool rest should be selected to ensure safety, and the long part of the lathe should be marked. In order to prevent shattering and chip injury, the equipment should be clear baffle in the appropriate position.

　　Described above is the stamping parts processing lathe equipment attention point of content, we sincerely welcome you to visit my company's official website! When stamping parts processing lathe equipment attention! Stamping parts processing is my company for many years has been engaged in the project, in the market effect response is better!